BASKET
0
ACCOUNT
$375.00
DeFelsko Coated Metal Plate Sets are coating thickness standards for verifying the accuracy and operation of various DeFelsko gages. These Plate Sets are an important part in fulfilling ISO/QS-9000 and in-house quality control requirements. Choices in substrate include Epoxy on Steel (Ferrous) and Epoxy on Aluminum (Nonferrous). The four plates within each set are of varying approximate thicknesses based on the gage and probes they are intended for.
All DeFelsko Coating Thickness Standards have measured values traceable to a National Metrology Institution. These Metal Plate Sets are ideal for use in the calibration lab, factory floor, and in the field. Plates are mounted in a protective binder to protect against damage.
S1 (STDS1)
*Must be with a range of 0-1500 um (0-60 mils)
| Model | Ideal for | Approximate Thickness | Coating/Substrate | Accuracy |
| S1 |
PosiTest F & FM PosiTector 6000 F, FS, FRS, |
Plate 1: 0 Plate 2: 75 μm 3 mils Plate 3: 250 μm 10 mils Plate 4: 1500 μm 60 mils |
Epoxy on Steel (Ferrous) |
± 0.43 μm |
| S2 |
PosiTector 6000 F0S, F45S, F90S, F90ES PosiTest DFT Ferrous & Combo |
Plate 1: 0 Plate 2: 75 μm 3 mils Plate 3: 250 μm 10 mils Plate 4: 1000 μm 40 mils |
||
| S3 |
PosiTest G & GM PosiPen A, B & C |
Plate 1: 0 Plate 2: 15 μm 0.6 mils Plate 3: 40 μm 1.6 mils Plate 4: 100 μm 4 mils |
||
| S4 |
PosiTector 6000 FXS* |
Plate 1: 0 Plate 2: 75 μm 3 mils Plate 3: 1000 μm 40 mils Plate 4: 1900 μm 75 mils |
||
| A1 | PosiTector 6000 N, NS, NRS, FN, FNS, FNRS, FNDS |
Plate 1: 0 Plate 2: 75 μm 3 mils Plate 3: 250 μm 10 mils Plate 4: 1500 μm 60 mils |
Epoxy on Aluminum (Nonferrous) |
± 0.43 μm ± 0.017 mil |
| A2 |
PosiTector 6000 NAS, N0S, N45S, N90S PosiTest DFT Combo |
Plate 1: 0 Plate 2: 75 μm 3 mils Plate 3: 250 μm 10 mils Plate 4: 500 μm 20 mils |
||
| A3 | PosiTector 100B, 200, 200B | Plate 1: 75 μm 3 mils Plate 2: 125 μm 5 mils Plate 3: 250 μm 10 mils Plate 4: 500 μm 20 mils |
*PosiTector FXS probes with a range of 0-1500 um (0-60 mils) and Serial Numbers
All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.
Plate Diameter: 38 mm (1.5") Measurement Diameter: 25 mm (1")
|
|
DeFelsko Zero Plates |
|
|
DeFelsko Polystyrene Block Sets |
|
|
DeFelsko Certified SPG Standards |
| (Show More Accessories) | |
|
|
DeFelsko Shims |
