Magnaflux S-1212 Table-Top Demagnetizers (S-1212)

    Magnaflux S-1212 Table-Top Demagnetizers
     

    Quote Required Quote Required

     

    This product has been discontinued.


    • Product Codes:
      631263
    • Tech Support Available
    • Product Weight: 0.00

    HAVE A QUESTION?
       Hours:   8:00 am to 4:30 pm CST

    Description


    Magnaflux demagnetization units remove any residual magnetism remaining after conducting Magnetic Particle Inspection. Demagnetization of ferromagnetic parts and materials often requires a requisite to final finishing or to ready an item for its ultimate use. Industrial demagnetizing is not an easy task, unless an effective demagnetizing system is used. It is especially difficult when the magnetic field must be reduced to a very low level.

    Compact in size and ruggedly built, Magnaflux demagnetizing equipment offers a fast and efficient method for demagnetizing a broad variety of part types and sizes. All of Magnaflux's S-Series Demagnetizing Units carry the CE and UKCA marks. 

    Typical Applications

    • Demagnetizing parts that have been subjected to magnetic particle inspection
    • Removing residual magnetism in parts intended for use near magnetic instrumentation
    • Demagnetizing parts with bearing or journal surfaces
    • Demagnetizing parts after contact with magnetic chucks or lifting magnets

    Features

    • Compact table-top demagnetization system
    • Waterproof and oilproof by virtue of their plastic-impregnated glass coating
    • Compact size fits into most existing test or production systems
    • Base of the coil opening may be mounted flush with the work surface using the angle support supplied, making part insertion fast and easy on the operator

    Videos

    Specs

    • 7,500 Amp Turns 
    • Inside dimensions: 12 x 12 in / 30 x 30 cm 
    • Size: 26.8 x 12.3 x 17.3 in /  68.1 x 31.2 x 44.0 cm 
    • Weight: 281 lb / 127 kg 
    • Available Voltages: 230, 400 (for 50 Hz only), 460 V 
    • Available Frequencies: 50 or 60 hertz, single phase power

    Additional Info

    RELATED ACCESSORIES


    RECENTLY VIEWED PRODUCTS

    carousel button
    • Wilson Yamamoto 71 HR30T with certificate
    • Wilson Yamamoto 73 HRA with certificate
    • Berg Rental - Rebound Tester Portable Hardness Tester w/D Probe
    • Test product 1
    • Berg HRF Scale 86-90 Carbide (W) ball calibrated
    • MagnaFlux FPI Crack Comparator, Range 0.2-3.0 mm
    • Wilson F Scale - Master 1/16 Ball Indenter, F63, F79 and F97 Rockwell Test Blocks
    • MagnaFlux Zyglo ZA-1633 Method D, Post Emulsified Hydrophilic FPI System
    • Wilson Model J
    • GE XLG3 Operating Manual
    • Wilson Brinell C Short Nib Diamond Cone Indenter
    • Berg HRF Scale 71-75 Carbide (W) ball calibrated
    • MagnaFlux EV6500 High-Intensity, Dual-Light LED UV Lamp
    • Spectroline Carry Case for HID Lamps
    • RT-1H Portable Rebound Hardness Tester D Package
    • Labino Nova Torch LED Crime Kit
    • Quaker Houghton Hamikleer 712-2 Synthetic Couplant
    • iCorDEX XARMOR IPhone 15 Plus ATEX Certified Case
    • iCorDEX ATEX Digital Camera
    • Foerster Set-Down Prism
    • Magnaflux Y-2 Yoke Light
    • Parker Plastic Case for Pie Gauge
    • Berg HRC Scale 46-50
    • Danatronics Power Supply
    • ModScope Automotive Videoscope Probes
    • Sherwin Tri-A Fluorescent Penetrant for Porous Materials Inspection
    • Berg Rental AWS Kit
    • Wilson Yamamoto 92.5 HR30X with certificate
    • MagnaFlux P-Series Standard Prod Sets
    • Spectroline Filter Protector
    • Mitutoyo 2X stylus 2μm/60°
    • Wilson KIT NIST REG BKS AND INDENTER
    • Waygate Krautkramer USM Go+ Ultrasonic Flaw Detector AWS Weld Kit
    • FW Bell 5170 Gauss Meter DC-20 kHz - Domestic AC Adapter - Transverse Probe w/ ISO Certification
    • Proceq Equotip 550 UCI Model Hardness Tester w/ Test Block
    • GE XLG3 Tall System Case
    • GE MIC-1001 Memory Card, Set of 5
    • Wilson Yamamoto 82 HRB with certificate
    • Bruker Q6 NEWTON Benchtop Spark Spectrometer
    • GAL Valve Fit-up and Inspection Gauge
    • Wilson V Testing Cradle
    • Tramex Flooring Inspection Kit
    • Chemetall Britemor 760 Post Emulsifiable Fluorescent Penetrant
    • MagnaFlux Zyglo ZA-1633 Method A, Water Wash FPI System
    • Parker DA-1500DR Portable Magnetic Inspection Unit
    • Hawkeye BNC Adapter
    • Fischer Technology CAL-S SMP Titanium LT31, 1% IACS
    • MagnaFlux Magnetic Flux Indicators pkg of 5
    • NewSonic SONO-ZG-F Special Coupling Fluid 100 ccm
    • Chemetall Britemor 768 Post Emulsifiable Fluorescent Penetrant
    • Berg HRB Scale 91-95 Steel Ball calibrated
    • MagnaFlux Portable Pressure Sprayer
    • MagnaFlux Daraclean 259 Heavy Duty Optic Cleaner
    • Wilson Yamamoto 35 HRC with certificate
    • MagnaFlux Yoke Light for Y-7 Yoke Only
    • PH Tool Wood Case for ASTM E2491 Phased Array Block
    • DeFelsko Replica Tape Holder
    • Waygate Krautkramer 3 Hole Conductivity Reference Block Sample Holder
    • Wilson Yamamoto 84 HR15T with certificate
    • Wilson A Scale Diamond Indenter M-O thru M-9
    • MagnaFlux NiCr Penetrant Test Panels 50 micron
    • Berg HRE Scale 91-95
    • Mitutoyo RS-232C Communication Cable
    • Berg HRE Scale 76-80
    • Wilson C  Scale Brale, Self Holding for High Speed. .555" long, .375" diameter
    • Wilson Yamamoto 86.5 HRF with certificate
    • Spectroline B-100X Blacklight
    • GE XLG3 Mini Magic Arm Kit
    • Berg Rental USM Go + Ultrasonic Flaw Detector
    • Berg A Scale Diamond with certificate - Class B
    • Sensor Networks Phased Array Immersion Annular Transducers
    • Parker Yoke Light, For B100
    • MagnaFlux FPI Crack Comparator, Range 0.005-0.125 in
    • Berg D Impact Body
    • FlawTech MA-786-7 Advanced Specimen
    • Wilson Round Ball Checking Anvil
    • Wilson Yamamoto 83 HRK with certificate
    • Waygate Krautkramer AC Power Supply and Battery Charger
    • Berg HRD Scale 76-80
    • Mitutoyo QM-Height Series 518-High Precision ABSOLUTE Digital Height Gage 0-18.3 in/0-465mm
    carousel Button