BASKET
0
ACCOUNT
Quote Required
The Wilson RH2150 Rockwell hardness tester is targeted for use in high volume labs and production environments for regular and superficial Rockwell hardness testing. It also supports worldwide research facilities with its large number of hardness scales.
Different Sizes for Flexibility
The RH2150 comes in two different sizes to meet additional part testing requirements: a vertical capacity of 10" and 14" (254mm and 356mm). Fully protected from outside environmental influences with a sheet metal casing and loadcell protection ensures accurate and precise measurements.
RH2150 Series Available in Two Load Ranges
The RH2150 Twin has the complete load range, including superficial and regular Rockwell scales as well as Brinell depth loads up to 187.5 kgf. The RH2150 Regular includes regular Rockwell scales as well as Brinell depth loads up to 187.5 kgf.
New Intuitive Interface along with DiaMet™
Putting the RH2150 into use is easy due to its new intuitive user interface for the standalone model that works seamlessly with Wilson's DiaMet™ software. The system requires minimal training and integrates easily into your current hardness testing lab or production floor. A DiaMet™ package is available to have all advanced features of DiaMet™. Advanced statistical calculations, results graphing, and easy test programmability streamline the testing process. Verification reminders trigger automatically to ensure compliance.
Guaranteed Integrated Hardness Solution
The RH2150 is guaranteed to integrate seamlessly with all Wilson products, from equipment to software to test blocks. Smart software functions help the user with standards traceability.
| Test Load Range | 1-187.5 kgf (9.,81 - 1838,7 N) |
| Test Load Type | Closed loop |
| Indenter Holder | Snap grip |
| Available Indenters Rockwell: | Rockwell diamond cone 120°, 1/16”, 1/8”, ¼”, ½” carbide ball indenters Brinell: 1mm, 2.5mm, 5mm and 10mm ball indenters |
| Rockwell Test Procedures ISO 6508-1, ASTM E18 | A, B, C, D, E, F, G, H, K, L, M, P, R, S, V, 15N, 30N, 45N, 15T, 30T, 45T, 15W, 30W, 45W, 15X, 30X, 45X, 15Y, 30Y, 45Y |
| Plastic Testing Ball Indentation ISO 2039-1 | HB5: 49N, 132N, 358N, 961N |
| Plastic Testing Ball Indentation ISO 2039-2 | HRR, HRL, HRM, HRE |
| Rockwell Carbon Testing Ball Indentation DIN 51917 | HR2.5: 7 HR5: 7, 20, 40, 60, 100, 150 HR10: 20, 40, 60, 100, 150 |
| Brinell Depth Testing (non-standardized) HBW-T | HBW-T2.5: 6.25, 15.625, 31.25, 62.5, 187.5 HBW-T5: 25, 62.5, 125 HBW-T10: 100 |
| Machine Control | 7” User Interface for data tracking, statistics, indirect verification, data export via USB or ethernet, physical start and stop buttons |
| Z Axis | Automatic Z axis drive, physical up and down movement buttons |
| Clamping Device (optional) | Unique clamping hat to hold samples in place before and during testing, clamping force 55 kgf (121lbs) |
| Workspace Illumination | White LED for proper indent positioning |
| Maximum Specimen Height | 254 mm [10 in]; 356 mm [14 in] |
| Maximum Specimen Weight | 50 kg (centered on anvil) |
| Depth From Center Line | 200 mm |
| Anvil | 63mm flat anvil with 19mm pin, more anvils optional as well as T-slot table |
| Operating Temperature | Range 10° to 38°C [50° to 100°F] |
| Humidity | 10% - 80% non-condensing |
| Machine Dimensions (D × W × H) | 600mm [28in] × 350mm [21in] × 1260mm [39.2in] (size 1) or 1360mm [41.2in] (size 2) |
| Accessory (optional) | Flat anvils, V anvils, Jack rest, indenter extensions 2”, 4” and 6” (only with clamping device) |
| Machine Net Weight | 125 kg (275lbs) |
| Power Supply | 110 - 240V / 50 - 60Hz |
