Labino MidBeam 1.0 UV LED (LABINO-MIDBEAM-1)

    Labino MidBeam 1.0 UV LED
     

     

    DISCONTINUED

    This product has been discontinued.


    • Product Codes:
      LABINO-MIDBEAM-1
    • Tech Support Available
    • Product Weight: 3.00

    HAVE A QUESTION?
       Hours:   8:00 am to 4:30 pm CST

    Description


    INVENTORY REDUCTION CLEARANCE SALE
    Only 1 Unit left of MidBeam L2212 Only 1 Unit left of MidBeam L2270

    The Labino MidBeam 1.0 is a lightweight and compact handheld lamp with a housing diameter of only 3.15 inches. The battery operated version weighs 1.23 pounds, making it easy to use on hard to reach inspection areas.

    The MidBeam comes with 4 LEDs giving a consistent beam. They also come with a white light LED for after inspections. Power is achieved instantly upon start up and the light is controlled with a simple UV/OFF/White Light switch. With its mechanical cooling system, no fan is needed for cooling the lamp. The MidBeam is 100% UV-B free and emits next to no visible light due to its visible light filter. It is compliant with ASTM UV-A intensity and wavelength specifications for FPI and MPI. IP65 approved for dust and water jetting proof.

    Features

    • Lightweight
    • Handheld - Allowing inspection of hard to reach places. 
    • Instant operations with immediate full power.
    • Consistent beam of 4 LEDs and is 100% UV-B free.
    • No fan due to its mechanical cooling system. 

    Specs

    Output Characteristics  MidBeam (Standard Verison)  MidBeam Aerospace 
    Intensity * > 4 500 μW/cm2 < 4 500 μW/cm2
    Visible Light *  <1 Lux / 0.09 fc  <1 Lux / 0.09 fc 
    Beam >1 200 μW/cm2* Ø 200 mm (7.9 ") Ø 150 MM (5.9 ")
    Ultraviolet LED  Four  Four 
    White Light LED  One  Zero 

    * At a distance of 38 cm (15")  

    Additional Info

    RELATED ACCESSORIES


    RECENTLY VIEWED PRODUCTS

    carousel button
    • Technisonic 5MHz x 0.187" (3/16) Diameter Right Angle Transducer
    • PH Tool Calibration Block No. 2, 1018 Steel
    • RVI Inspector S - Handheld base unit
    • Technisonic 5MHz, High Res, ¼” diameter  Transducer
    • Cygnus 2+ (Hands Free) - Ultrasonic Thickness Gauge
    • PH Tool Asme Sec V Basic Cal Block, 5" Type 304 Stainless Steel
    • Sensor Networks Phased Array Immersion Annular Transducers
    • Labino BB 2.0 Series UV LED Light
    • DeFelsko PosiTector SPG Surface Profile Gage Probes
    • DeFelsko PosiTest LPD Sponges
    • DeFelsko Positest Oven Temperature Logger Probes
    • PH Tool ASTM E317 Resolution Block, Fig. 6, #3 Fbhs Metric - 1018 Steel
    • Wöhler VIS 200 Inspection Camera
    • PH Tool Wood Case for Phased Array Calibration Block No.2 - 3/4 Inch Thick
    • Mitutoyo Dial Caliper Series 505
    • Wöhler VIS 350 Inspection Camera
    • Labino MidBeam 2.0/Hercules Ex Car Charger
    • Echo Ultrasonics EchoFLOW Fluid
    • CorDEX ToughPIX 2301XP
    • Gould-Bass Cable Assemblies
    • Echo Ultrasonics EchoMix Single (1 Part) Powder Ultrasonic Couplant
    • DeFelsko 3 ml Graduated Syringes
    • Labino Torch Nano 375nm
    • Zetec ElbowFlex Pipe Elbow Scanner UT Instrument
    • Technisonic Transducer 5MHz 1/2"
    • Waygate Krautkramer Protective Membranes for PMCR - PMCS Transducers
    • Jireh Center Base
    • Jireh Blind Side Base
    • Chemetall Britemor 755 Post Emulsifiable Fluorescent Penetrant
    • PH Tool Drilled Hole Sizing Block, 1018 Steel
    • DeFelsko PosiTest HHD Adaptors
    • Tramex Hand Held Electrode (with cable and 7" (200mm) insulated pins)
    • Berg HRA Scale 86-90 Calibrated
    • Extech MultiMaster 500,000 Count Multimeter with Temperature
    • Echo Ultrasonics ECHO 8 HT High Temperature Ultrasonic Couplant
    • Extech Replacement Pins - Package of 20
    • Exacto Pit Depth Gauge with 4 Inch Bridging Bar
    • Sensor Networks SensorScan DHT 400 High-Temp Dual-Element Transducer
    • DeFelsko PosiTector UTG Ultrasonic Thickness Gage Probes
    carousel Button