Waygate Krautkramer IPS Style Immersion Transducers (IPS-IMMERSION)

    Waygate Krautkramer IPS Style Immersion Transducers
     

    Quote Required Quote Required

     

     

    This product has been discontinued.


    • Product Codes:
      113-221-320
    • Tech Support Available
    • Product Weight: 1.00

    HAVE A QUESTION?
       Hours:   8:00 am to 4:30 pm CST

    Description

    Waygate Technologies Krautkramer IPS Style Immersion Transducers, Baker Hughes business products (formerly GE Inspection Technologies), have small diameter cases and are designed for immersion applications where smaller transducers are needed. The IPS Style comes with two series, Alpha and Gamma. The Alpha series provides users with maximum bandwidth and resolution capabilities. The Gamma series gives users with increased sensitivity and penetration. All IPS Style Transducers have Microdot connectors. In order to receive the best results, connectors should be sealed with a non-water soluble grease. 

    Please note that cables are not included with this purchase.

    Please be sure to specify focal length. If needed, look under the ‘specifications’ tab to calculate your transducer’s focal length.

    Applications:

    • Parts with irregular or complex geometry, such as gears and valves
    • Automated or mechanized scanning
    • Applications requiring very high near surface resolution or detection of very small flaws
    • Scanning pipes, tubes and tanks
    • Plates, billets and bars
    • Disks, axles and shafts

    Specs

    Immersion Transducer Focal Lengths Equation

    The following table lists the near field lengths and minimum and maximum practical focal lengths in water expressed in inches and millimeters. To find the approximate near field length in steel, divide all values by 4. 

    N = (Dia.)2 x (Freq.) / (4 x Velocity) 

    N = Near field practical focal length

    Min = Minimum practical focal length

    Max = Maximum practical focal length

    NORTH AMERICAN IMMERSION TRANSDUCER FOCAL LENGTH

    Frequency
    (MHz)
    Element Diameter: Inches (Millimeters)
    1.0
    (25.4)
    .75
    (19.1)
    .50
    (12.7)
    .375
    (9.5)
    .25
    (6.4)
    .125
    (3.2)
    1.0 4.3
    2.0
    3.0
    2.4
    1.5
    2.0
    1.1
    1.0
    1.0
         
    2.25 9.6
    2.0
    6.0
     5.4
    1.5
    4.0
    2.4
    1.0
    2.0
    1.4
    0.8
    0.8
    0.6
    0.5
    0.5
     
    3.5 15.0
    2.0
    8.0
     8.4
    1.5
    6.0
    3.7
    1.0
    2.5
     2.1
    0.8
    0.5
    0.9
    0.5
    0.5
     
    5.0 21.0
    2.0
    8.0
    12.0
    1.5
    8.0
    5.4
    1.0
    4.0
    3.0
    0.8
    2.0
    1.3
    0.5
    0.8
    0.3
    0.3
    0.3
    10.0   24.0
    1.5
    8.0 
    10.7
    1.0
    6.0
     6.0
    0.8
    4.5
    2.7
    0.5
    1.5
    0.7
    0.3
    0.3
    15.0     16.0
    1.0
    6.0
     9.0
    0.8
    6.0
    4.0
    0.5
    2.0
    1.0
    0.3
    0.5
    25.0         6.7
    0.5
    2.0
    1.7
    0.3
    1.0

    RELATED ACCESSORIES


    RECENTLY VIEWED PRODUCTS

    carousel button
    • Mitutoyo Connecting cable (SJ301)
    • IBG Crack detection probe with X-coil, 100kHz to 800kHz
    • Waygate Krautkramer Spare Soles WPE for WB and WK Transducers Set of 10
    • Berg Rental - CL5 Ultrasonic Thickness Gauge
    • Danatronics Coiled Cable, 4'
    • Dakota PMX4-DL High Penetration Thickness Gauge
    • PH Tool ERVW Pipe Calibration Blocks, Circ Scan
    • Berg 1/16 Carbide Ball Penetrator Class B
    • PH Tool MIL-STD-271F Performance Verification Reference Block, 6061-T6 Aluminum
    • Waygate Krautkramer Integral Wedge Phased Array Probes
    • Waygate Krautkramer VRY Angle Beam Transducers Dual Element Style - European Standards
    • Sherwin TWIN KDS Panels
    • Wilson Carbide ball indenter 5mm for RH2150
    • Luxxor Liquid Light Guide
    • Berg 3C2-234 QQI Test Shims
    • AFFRI TESTING INSTRUMENTS Universal Hardness Tester LD3000AX
    carousel Button