Fluke 1AC II Non-Contact Voltage Tester (2432932)

    Fluke 1AC II Non-Contact Voltage Tester
    Starting at:

    $24.00 1. Quote Required

    ONLY 10 LEFT IN-STOCK

    This product has been discontinued.


    • Product Codes:
      2432932
    • Tech Support Available
    • Product Weight: 0.00

    HAVE A QUESTION?
       Hours:   8:00 am to 4:30 pm CST

    Description


    ONLY 10 LEFT IN STOCK

    The Pocket-Sized Voltage Detector

    The Fluke 1AC II non-contact voltage tester is portable and simple to use. Just touch its tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, it indicates the presence of voltage. Whether you are an electrician, maintenance worker, service technician, safety personnel, or homeowner, you can quickly check for energized circuits both at work and at home, and even identify miswired electrical outlets.

    The Tip Glows Red and A Beeper Sounds When Voltage Is Detected
    • A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected
    • Optionally, the beeper can be disabled for use in quiet environments

    Continuous Self-Test So You Always Know It’s Working
    • When the tip blinks red you know it’s working properly
    • Provides a continual visual indication that the 1AC II is on

    90 V To 1000 V AC or 200 V To 1000 V AC Voltage Detection Range For Wide Application Use
    • Wide voltage detection range allows for use in a broad range of applications
    • Also available in a low voltage model from 20 V to 90 V AC for controls circuits

    Features

    • Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected
    • Continuous self-test so you always know it’s working
    • Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC
    • Audible/Silent mode for added convenience
    • Rated to CAT IV 1000 V for added protection
    • CE and CSA approved

    Additional Info

    RECENTLY VIEWED PRODUCTS

    carousel button
    • Ritec Locator
    • Waygate FH2E-WR-DME Wear-Resistant Fingertip Probe 7.5 MHz 0.55 Inch Contact Dia. With Potted Cable
    • Extech 7 Contact/Thermocouple Datalogger with Alarm
    • Waygate Technologies DP-104 Penetrator Probe 1 MHz 1.25 Inch Contact Dia. Requires KBA532 Cable
    • Proceq Equotip Leeb Impact Device Cable 1.5 Meter
    • RVI Infinity Innovation-Inspector S Videoscope (RVI-S)
    • Extech 200A Mini Clamp Meter + DMM
    • Mitutoyo 25-50mm Blade Type Micrometer w/ Type D Blade
    • Parker B-300UF Contour Probe
    • Ritec Locator Sonde, with Camerahead
    • GE MIC-270R Standard Probe Cylindrical Radius Shoe
    • Ritec Battery Unit
    • NewSonic SONO-MPS-10 Magnetic Precision Test Stand for Welds with Handheld Probes
    • Mitutoyo Surftest SJ-210 Portable Surface Roughness Tester - Standard Drive Unit w/ Probe & Cable
    • Mitutoyo Micrometer 0-1"
    • Waygate Krautkramer DC Block Inch 1018 Steel
    • Waygate Krautkramer Mini Eddy Current Drive Unit
    • GE Stainless Steel 4-Step Block
    • Gould-Bass Swing Away Comparator
    • MagnaFlux Mag Kit Spray System 230V 50Hz
    • Proceq Equotip 550 Leeb D & UCI HV1-HV10 Hardness Tester w/ Test Blocks
    • Ritec Conical Adapter
    • Teleweld Standard Impression Ball, 10mm
    • Extech Wood Moisture Meter
    • Waygate Technologies FH2E-DME Fingertip Probe, 7.5 MHz 0.38 In Contact Dia. with Potted Cable
    • Teleweld Computer
    • Extech High Temperature IR Themometer
    • Extech Water Damage Restoration Kit
    • Ritec Joystick Remote
    • GE USN 58L - Krautkramer
    • Mitutoyo Deep Grove Detector
    • Mitutoyo Input Tool
    • Ritec Pan and Tilt Camera, RiFlexio S
    • Ritec Quicklock Connection, for FW 150 L Robotic Crawlers
    • Ritec Accumulator
    • Extech Mini IR Thermometer
    • Mitutoyo Standard Detector – 5μm diamond radius
    • Mitutoyo Blade for Combination Set
    • FW Bell STH57-0402 2"" Transverse Probe
    • Ritec FW 90 L Camera Tractor, ID 100-250 mm
    carousel Button