Waygate Krautkramer USN 60 Ultrasonic Flaw Detector, Color LCD, VGA Output, Cold Temperature (USN60)

    Waygate Krautkramer USN 60 Ultrasonic Flaw Detector, Color LCD, VGA Output, Cold Temperature
     

    Quote Required Quote Required

     

    This product has been discontinued.


    • Product Codes:
      022-508-898
    • FREE Ground Shipping
    • Tech Support Available
    • Product Weight: 10.00

    HAVE A QUESTION?
       Hours:   8:00 am to 4:30 pm CST

    Description

       

    The Waygate Technologies Krautkramer USN 60 flaw detector, a Baker Hughes business product (formerly GE Inspection Technologies), has been optimized for direct sunlight and operation at extreme temperatures. The 022-508-898 model features BNC connectors whereas the 022-508-899 model features Lemo-1 connectors.

    The vibrant colors of the high-resolution LCD screen produce "Analog Look & Performance" echo dynamics. The four selectable color schemes can match the conditions of light during inspections. These new characteristics make the instruments ideally suited for outdoor use with its increased long battery operation time.

    Outstanding Ultrasonic Performance

    The combination of the rugged USN durability, 11 hours of battery operation, fast rotary knob operation, outstanding ultrasonic performance, and the "square wave pulser" form powerful portable ultrasonic inspection tool. Also features a 250 KHz to 25 MHz frequency range, VGA output, RF output and auto-callibration.

    Optimized & Designed for Outdoor Use 

    • Extreme temperature use (-20°C to +55°C /-4°F to 130°F)
    • Easy to view in direct sunlight
    • 11-hour battery operation

    Vibrant colors

    • Hi-resolution color LCD display produces "Analog Look and Performance" echo dynamics.
    • 4 selectable vibrant display color schemes to match lighting conditions.
    • Gates and gate functions are color-coded for easy identification and fast adjustment.


    Features

    • Simple operation with fast rotary knob adjustments; gain is always directly accessible with the left-hand rotary knob and lockable.
    • Auto CAL makes calibration fast & easy.
    • 15 Hz to 6 kHz (spike mode) PRF and 15 Hz to 2 kHz (square mode) PRF (pulse repetition frequency).
    • 2 independent gates monitor amplitude and sound path distance for both flaw detection and thickness measurement applications.
    • 250 KHz to 25 MHz frequency range.
    • RF display mode enhances signal evaluation and bond inspection of dissimilar materials.
    • 4 selectable damping settings (50, 75, 150, 500 ohms) for optimum probe performance.
    • 1 mm to 28 m (0.040” to 1100”) range (in steel) covers thin to lengthy acoustically clean materials.
    • dB REF key evaluates subsequent echoes gain value and amplitude against the highest echo in Gate A (reference echo) when activated.
    • IF (Interface) Gate Option for automatic start of the display, Gate A, Gate B, and / or DAC / TCG for immersion testing applications.
    • VGA Output Option provides an easy way to connect
      to a PC monitor or PC projector for viewing by large audiences or training purposes.
    • RF Output Option outputs the raw RF waveform via a standard Lemo connector for further analysis.
    • BEA (Backwall Echo Attenuator) Option allows independent gain control of the region under Gate B for backwall echo monitoring.
    • 19" Rack Mount Model.

    Specs

    Model USN 60
    Range 0.040” to 1100” (1 mm to 28 m) at steel velocity; range selectable in fixed steps or continuously variable
    Material Velocity Continuously adjustable from 0.0098 to 0.6299 inches/µs (250 to 16,000 m/s); 65 selectable material velocities
    Display Delay -20 to 3498 µs in steel (dependent on range)
    Probe Delay/Zero Offset 0 to 999.9 µs
    Damping 50, 75, 150, 500 ohms
    Gain 0 to 110 dB adjustable in selectable steps 0.1, 0.5, 1.0, 2.0,
    6.0, user definable, and locked
    Test Modes Pulse echo, dual, and thru-transmission
    Pulser Square wave excitation pulse
    Pulse Voltage (Square Wave Pulser Mode) 50 to 450 V scrollable in 10 V adjustments
    Pulse Width (Square
    Wave Pulser Mode)
    Tunable from 50 to 1000 ns in 10 ns adjustments
    Pulse Energy (Spike Mode) Low, high
    Pulse Repetition Frequency Autolow, autohigh, manually adjustable from 15 to 6000 Hz (spike mode) and 15 to 2000 Hz in square wave mode, in 5 Hz increments, external trigger (spike mode only)
    Bandwidth (Amplifier Bandpass) 0.25 to 25 MHz with 10 selectable settings including
    broadband
    Gate Monitors Two independent flaw gates controllable over entire sweep range
    Measurement Modes Zero-to-first, multi-echo with selectable flank or peak detection
    Rectification Positive halfwave, negative halfwave, fullwave, RF
    Reject (Suppression) 0 to 80% linear
    Units Inch, millimeter, or microsecond selectable
    Operating Temperature -20° to 55°C (-4° to 130°F);
    -25° to 70ºC (-13° to 158 º F ) storable
    Languages Selectable English, German, French, Spanish, Italian, Portuguese, Norwegian, Swedish, Finnish, Danish, Dutch, Russian, Czech, Romanian, Slovakian
    Probe Connectors BNC or Lemo selectable at order
    Keypad International symbols
    Battery Power Lithium Ion battery pack; NiMH, NiCad or alkaline cells substitutable
    Battery Life 11 hours on Li-Ion battery pack
    Size 11.1” W x 6.75” H x 6.25” D (282 x 171 x 159 mm)
    Weight 6.6 lbs. (3.0 kg) Li-Ion battery; 3.5 lbs.(1.6 kg) without
    battery
    Color Leg Easy identification of leg and skip distances for angle beam inspection in A-scan or grid background colors
    Weld Rating Calculation Simplifies the rating of weld indications according to AWS specification D1.1, (formula D=A-B-C)
    Warranty 2 year conditional warranty on parts and labor; free 2nd year contingent upon return of unit within 13 months of purchase for recertification
    Dust Proof/Dripping Water Proof As per IEC 529 specification for IP54 classification
    Compliance EMC/EMI: EN 55011:2007, EN 61000-6-2:2005

    Additional Info

    Package Includes

    RELATED ACCESSORIES