Berg Rental - DMS2E Ultrasonic Thickness Gauge

Rental Package includes:

• DMS2E Thickness Gauge
• FH2E-D Fingertip Probe OR DM401-GP General Purpose Probes
  (other probes available upon request, must specify, may increase package cost)
• Carbon Steel Calibration Test Block (Optional)
• Couplant
• Operating Manual
• Carry Case
• ISO 17025 Certificate of Calibration

Please contact Berg Engineering at 1-847-577-3980 for package rental cost and availability.

Specifications:

Operating Principle

Ultrasonic pulse/echo

Measurement Modes

Dual-element, Dual-element thru coat

Big Digits Display Mode

Selectable .75" thickness digits easily seen at a quick glance

Probe Zero Adjustment

Automatic microprocessor controlled

V-Path Correction

Automatic microprocessor controlled

Measuring Range

.025" to 25.00" (.66 to 635 mm); depends on material, probe, surface, condition, and temperature

Digital Displayed Resolution

.001 or .01 inches; .01 or .1 mm

Reading Update Rate

4 or 8 Hz; 32 Hz in Min Cap Mode

Gain

Automatic or adjustable in 1 dB steps

Receiver Bandwidth

500 KHz to 15 MHz

Material Velocity Range

39,400 to 393, 662 in/sec.; 1000 to 9999 m/sec.

Power Supply

4 ea. Standard, AA size, alkaline or nicad rechargeable batteries

Fast Battery Charger

External, 5 hour maximum charge time

Battery Life (operating time)

40 hours continuous use at 4 Hz update and backlight & Min Cap off

Instrument Shut-off

Manual or automatic after 1 to 15 minutes of non-use

I/O Port

Bidirectional RS232 selectable: baud rate (maximum 115,200), printer, direct reports

Multilingual Operation

English, German, French, Italian, and Spanish

Operating Temperature Range

+10° to +120°F (–10° to + 50°C)

Size

10.1" H x 5.1" W x 1.2" D (256 mm x 129 mm x 30 mm)

Weight

1.6 lbs. (725 g) with batteries

Hazardous Area Operation

Safe operation as defined by MIL-STD- 810E, Method 511.3, Procedure 1.

Warranty