Dakota PCX Series Precision Thickness Gauges (PCX-SERIES)

    Dakota PCX Series Precision Thickness Gauges
    Starting at:

    $2,950.00 1. Quote Required

     

    This product has been discontinued.

    ADD TO CART

    Share this product
    • NEW Product
    • Product Codes:
      PCX8-DL
    • Tech Support Available
    • Product Weight: 0.00
    HAVE A QUESTION?
      Call:   1-847-577-3980
      Send an Email
       Hours:   8:00 am to 4:30 pm CST

    Description


    The Dakota PCX Precision Thickness Gauge is equipped with all the necessary features for precise measurement of material thickness, suitable for virtually any material. It measures thin materials with pinpoint accuracy, offering a range from 0.15mm (0.006”) to 25.40mm (1.000”) with an accuracy of up to ±1%. The gauge supports three measurement modes: Interface Echo (IE), Echo Echo (EE), and Plastic mode (PLAS). Users can store up to 100,000 readings in the gauge's memory for later analysis. These readings can be downloaded to a PC via Bluetooth® or USB, using an inspection application or DakMaster™ software for further analysis and instant report generation. The Dakota PCX is flexible and easy to use, ensuring accurate and efficient material assessment.

    Key Features:

    Customizable

    Choose & customize the reading display

    The Dakota PCX Precision Thickness Gauge has a choice of display modes allowing the user to select the most appropriate for their needs; Readings, Selected Statistics, Bar Graph, Run Chart & Differential Mode.

    Measurement Modes

    Interface Echo (IE); The total thickness from the top of any coating through to the material density boundary (typically the back-wall) is measured. Suitable for measurement of materials between 1.65mm and 25.4mm (0.065” to 1”) thick.

    Echo Echo (EE); ideal for measuring thin materials, the material thickness from the top surface of the material to the material density boundary (typically the backwall) is measured. Suitable for measurement of materials between 0.15mm and 10.15mm (0.006” to 0.4”) thick.

    Plastic Mode (PLAS); specifically used for measuring very thin plastics between 0.15mm and 5mm (0.006” to 0.197”) thick. A graphite delay line is required when using this mode.

    User Definable Upper and Lower Limits

    The Dakota PCX Precision Thickness gauge has user definable upper and lower limits with audible and visual pass/fail warnings allowing the user to compare readings to predefined values. The Dakota PCX Precision Thickness Gauge can store up to 40 pre-programmed limits which can be set for individual readings or for each batch.

    If a measurement is taken which falls outside set limits, the reading value and the limit icon turn red, the red LED flashes and the alarm beeps providing immediate indication of problem areas.

    Calibration Options

    The Dakota PCX Precision Thickness Gauge has a number of calibration options including the 1-Point & 2-Point method and Velocity. Alternatively, the user can select one of 39 pre-set materials stored within the gauge including; aluminium, steel, stainless steel, cast iron, plexiglass, PVC, polystyrene and polyurethane.

    The Dakota PCX Precision Thickness Gauge allows users to store into memory up to three calibrations. Once saved the user can select a calibration without the need to re-calibrate the gauge. Using the gauge’s alpha-numeric function, calibration memories can be re-named to suit the calibration setting.

    Features

    • Interface Echo (I-E) Echo-Echo (E-E) & Plastic Mode (PLAS) measurement modes
    • Measurement range from 0.15mm (0.006") to 25.40mm (1.00")
    • 2-Point, 1-Point, Material & Factory Calibration options
    • Three user programmable calibration memories
    • User selectable measurement rate; 4, 8, 16 readings per second
    • User selectable reading resolution; 0.1mm (0.01") or 0.01mm (0.001")
    • Scan Mode
    • Readings, selected statistics, Bar Graph, Run Chart, B-Scan & Differential Mode
    • Gauge memory; stores up to 100,000 readings in up to 1,000 sequential or grid batches
    • User definable upper and lower limits with audible & visual pass/fail warnings
    • USB and Bluetooth® data output to DakMaster™

    Specs

    Package Includes

    RECENTLY VIEWED PRODUCTS

    carousel button
    • Parker PL-8 Magnetizing Coil
      Parker PL-8 Magnetizing Coil
    • Waygate Krautkramer PKI 2 Ultrasonic Flaw Probe Cable, UHF to Lemo-1, 6.5 ft
      Waygate Krautkramer PKI 2 Ultrasonic Flaw Probe Cable, UHF to Lemo-1, 6.5 ft
    • Wilson Flat Anvil, UH4000 80 mm
      Wilson Flat Anvil, UH4000 80 mm
    • PH Tool Wood Case for Phased Array Calibration Block No.2 - 3/4 Inch Thick
      PH Tool Wood Case for Phased Array Calibration Block No.2 - 3/4 Inch Thick
    • Tramex WME Calibration Check Box
      Tramex WME Calibration Check Box
    • Waygate Krautkramer DA235 Ultrasonic Thickness Cable, Lemo 00 Double Plug to Microdot
      Waygate Krautkramer DA235 Ultrasonic Thickness Cable, Lemo 00 Double Plug to Microdot
    • Extech 600A True RMS Clamp Meter
      Extech 600A True RMS Clamp Meter
    • Waygate Krautkramer WB35-O2 Angle Beam Transducer 2.0 MHz x 35 Degree - European Standards
      Waygate Krautkramer WB35-O2 Angle Beam Transducer 2.0 MHz x 35 Degree - European Standards
    • Spectroline Connector Cable
      Spectroline Connector Cable
    • Tramex Hygro-i Probe - Pack of 1
      Tramex Hygro-i Probe - Pack of 1
    • Berg Rental - CL5 Ultrasonic Thickness Gauge
      Berg Rental - CL5 Ultrasonic Thickness Gauge
    • RVI 1.6mm Diameter/2M/160,000 pixels /non-articulation Mini Probes for INSPECTOR S/ only Probe
      RVI 1.6mm Diameter/2M/160,000 pixels /non-articulation Mini Probes for INSPECTOR S/ only Probe
    • Waygate Technologies Test Attachment, 13.5 mm
      Waygate Technologies Test Attachment, 13.5 mm
    • Waygate Krautkramer Tube Longitudinal SAW Tester
      Waygate Krautkramer Tube Longitudinal SAW Tester
    • Sonotech Sonotrace GR40
      Sonotech Sonotrace GR40
    • PH Tool Drilled Hole Sizing Block, 1018 Steel
      PH Tool Drilled Hole Sizing Block, 1018 Steel
    • Magnaflux Pie Field Gage
      Magnaflux Pie Field Gage
    • Spectroline UVA Fan Cooled Lamp 100 Watt Spot 8ft Cords
      Spectroline UVA Fan Cooled Lamp 100 Watt Spot 8ft Cords
    • FW Bell SAH57-1904 4"" Axial Probe
      FW Bell SAH57-1904 4"" Axial Probe
    • PH Tool Custom Special Alloy 5-Step Block, Metric Part No. C00307 Alloy: 516 Gr 70, Carbon Steel
      PH Tool Custom Special Alloy 5-Step Block, Metric Part No. C00307 Alloy: 516 Gr 70, Carbon Steel
    • Waygate Krautkramer MPKL 2 Ultrasonic Flaw Probe Cable, Lemo-00 to Lemo-1, 6.5 ft
      Waygate Krautkramer MPKL 2 Ultrasonic Flaw Probe Cable, Lemo-00 to Lemo-1, 6.5 ft
    • Waygate Technologies DA303 High Penetration Probe, 2 MHz, 0.64" Contact Dia.(Requires KBA533 Cable)
      Waygate Technologies DA303 High Penetration Probe, 2 MHz, 0.64" Contact Dia.(Requires KBA533 Cable)
    • Parker MA-7000 Individual Prod Set
      Parker MA-7000 Individual Prod Set
    • PH Tool Tipsy Step Block
      PH Tool Tipsy Step Block
    • Echo Ultrasonics EchoMix Single (1 Part) Powder Ultrasonic Couplant
      Echo Ultrasonics EchoMix Single (1 Part) Powder Ultrasonic Couplant
    • Waygate Technologies DA412 Thin Materials Probe, 10 MHz, 0.30" Contact Dia. (Requires KBA532 Cable)
      Waygate Technologies DA412 Thin Materials Probe, 10 MHz, 0.30" Contact Dia. (Requires KBA532 Cable)
    • DeFelsko PosiTest LPD Extension Rod
      DeFelsko PosiTest LPD Extension Rod
    • Spectroline Soft carrying case
      Spectroline Soft carrying case
    • ServoRobot Wiki-Scan Verification Block
      ServoRobot Wiki-Scan Verification Block
    • FW Bell 5080 Gauss Meter, DC-20kHz, 300 G / 3 kG / 20 kG
      FW Bell 5080 Gauss Meter, DC-20kHz, 300 G / 3 kG / 20 kG
    • Ritec Locator Sonde, 512 Hz
      Ritec Locator Sonde, 512 Hz
    carousel Button