Gould-Bass UAES-404 Electrostatic Spray Booth System (N420120001)

    Gould-Bass UAES-404 Electrostatic Spray Booth System
     

    Quote Required Quote Required

     

    This product has been discontinued.


    • Product Codes:
      N420120001
    • Tech Support Available
    • Product Weight: 0.00

    HAVE A QUESTION?
       Hours:   8:00 am to 4:30 pm CST

    Description


    The Gould-Bass UAES-404 Electrostatic Spray Booth System processes parts through an electrostatic penetrant application system. The electrostatic spray gun and the exhaust blower are interlocked to prevent spraying penetrant without activating the exhaust fan. This System has a split roof, a 12" tubeaxial exhaust extraction system with filter bank, a full roller grille, and a mounted drum pump or pressure pot complete with necessary regulators, filters, and gauges.

    The UAES-404 has a maximum component size of 24" x 24" x 24". A 480VAC 3 phase 60 Hz 1/2" airline is required with this System.

    Features

    • Split Roof
    • Side Curtains
    • Fluorescent Light Fixture
    • 12" Tubeaxial Exhaust Extraction System with Filter Bank
    • Full Roller Grille
    • CR2000 Cool-Running Blacklight Lamp with Cord on Reel
    • XS3 Series Electrostatic Gun Modified for Penetrant
    • 10 gallon Pressure Pot
    • Max component Size of 24" x 24" x 24"

    RECENTLY VIEWED PRODUCTS

    carousel button
    • Mitutoyo 342 Series Point Micro Carbide
    • GE Inspection Technologies (Krautkramer) DA312B16 Probe with BNC Connectors
    • Dakota UMX2 Corrosion Thickness Gauge
    • DeFelsko High Accuracy Burnishing tool
    • Mitutoyo Digimatic Cable with Data Button IP Type
    • Waygate Technologies Large Soft-Sided Carrying Case
    • Spectroline Filter
    • MagnaFlux TAM Panel Ultrasonic Cleaning Unit 230V
    • Berg CM230 QQI Test Shims
    • Berg CX430P6 QQI Test Shims
    • 3rd Generation PHR-300 Automatic Magnetic (Rockwell) Hardness Tester
    • Mitutoyo Standard nosepiece
    • ETher NDE PhaseCheck
    • GEIT 4.0mm Forward View Optical Tip - T40115FN - Black
    • Tramex Insulated 1.5" (10 per pack) Suitable for Hammer Electrode
    • Probe Rotating, Rigid, Dia = 12.70mm (1/2”) wl = 35mm
    • Labino Galaxy LED Overhead Unit Unit:Slave Beam:Mid Plug:N/A
    • DeFelsko Lens Shields, Pack of 5
    • KB Hocking NDE Eddy Current Probe
    • Teleweld Telebrineller Complete Set
    • Buehler PhenoCure
    • Flawtech ASME Section XI Appendix VIII Supplement 3 Kit for Ferritic Piping
    • Spectroline Upgraded Premium Spot Bulb Medium Base 100 Watt
    • Waygate Technologies XLG3T6150SF Side View Optical Tip Brown
    • Olympus C080-027-090-50 8mm Diameter Borescope
    • Mitutoyo 570 Series Absolute Digimatic Height Gauge
    • Berg "A" Scale-Carbide Test Diamond w/ certificate - Class B
    • Flawtech Air Force MT Practical Exam Kit
    • Waygate Krautkramer PKI 2 Ultrasonic Flaw Probe Cable, UHF to Lemo-1, 6.5 ft
    • Mitutoyo Small hole stylus 5μm
    • Ritec TFT-Monitor, 5.6 Inch Screen
    • Mitutoyo Surftest SJ-220 Portable Surface Roughness Tester
    • Tramex Sealant tape for insulated hoods -24.5 feet for approximately 9 Tramex insulated hoods
    • Waygate Technologies Retrieval Tool Kit for 8.4 mm probe, 3.3 m working length
    • Tramex Calibration Check for relative humidity probes RHP & RHP-B (reusable saturated salts)
    • ibg eddyguard C Eddy Current Tester
    • Zetec Phased Array Probe with Wedge
    • GE Krautkramer MIC10 UCI Hardness Tester with MIC2010A 10Kgf Handheld Probe
    • Spectroline Rubber bumper with Borofloat® glass
    • Sensor Networks 7.5Mhz Straight Pencil Probe
    • Waygate Krautkramer ID Tube Inspection Eddy Current Probe, 18 kHz, Absolute and Differential Bridge
    • Chemetall Ardrox 9703 Water Washable Fluorescent Penetrant
    • Mitutoyo CONTACT POINT, 10MM DIA. BALL"
    • Mitutoyo Setting attachment: Slider type
    • Waygate Krautkramer Hard Membranes for G20MN Probe
    carousel Button