Magnaflux Shot Timer (MF-622901)

    Magnaflux  Shot Timer
     

     

    DISCONTINUED

    This product has been discontinued.


    • Product Codes:
      MF-622901
    • Tech Support Available
    • Product Weight: 10.00

    HAVE A QUESTION?
       Hours:   8:00 am to 4:30 pm CST

    Description

     The Magnaflux Shot Timer provides universal shot time detection for all MPI Equipment. It reads shot time with 10 ms resolution on digital display and detects how long magnetic field is present. Precision reference air coil transducer. Microprocessor controlled for accurate signal capture and peak detection.

     

    Specifications Compliance:

    ASTM E709-08, ASTM E1444

    RECENTLY VIEWED PRODUCTS

    carousel button
    • MagnaFlux Standard Lead Contact Plate
    • Wilson Yamamoto 83 HRK with certificate
    • GE 45.72 cm (18 in.) Tube for 3.9 mm Probe
    • Wilson Round Ball Checking Anvil
    • Wilson Mandrel, 2" (50.8mm) For Gooseneck Anvil
    • Mitutoyo QM-Height Series 518-High Precision ABSOLUTE Digital Height Gage 0-18.3 in/0-465mm
    • Berg HRD Scale 76-80
    • Mitutoyo Deep groove 20 stylus 10μm
    • Chemetall Ardrox 9704 Water Washable Fluorescent Penetrant
    • MagnaFlux Connector Male Quick Connect 4/0 Cable Termination
    • Wilson Yamamoto 92 HRF with certificate
    • FlawTech VA-686-3 Advanced Specimen
    • Wilson Yamamoto 38 HR30N with certificate
    • Berg HRC Scale 31-35
    • Mitutoyo Knife edge surface stylus 2μm/60°
    • Wilson Yamamoto 80 HR30T with certificate
    • Wilson Yamamoto 74 HR15T with certificate
    • Sensor Networks SNI560, 5MHz Probe .63" Dia, 100'MD-BNC Cable
    • Berg HRB Scale 41-45 Steel Ball calibrated
    • Wilson Yamamoto 125 HRL with certificate
    • Mitutoyo KA-212 Two Axis Counter
    • MagnaFlux Dual Verticle Prod Set, Lug Connection for M-2000 Series
    • Tramex Ambient RH Long Narrow Bayonet Probe
    • Berg HRB Scale 76-80 Steel Ball calibrated
    • Mitutoyo Digimatic Cable with Data Button IP Type
    • Fischer Technology CAL-S SMP CU 58 MS/m, 100% IACS
    • Wilson N Brale, Gear Roots & Groves - .115" tip diameter, Wedge Point N Scale (thinest possibl
    • Magnaflux Filter EV6000
    • PH Tool Calibration Block No. 2, 1018 Steel
    • Danatronics Telescopic Wand 8'-15'
    • Wilson Yamamoto 68 HRA with certificate
    • Wilson Yamamoto 57 HRK with certificate
    • MagnaFlux Vibrance EV5000 UV-LED Black Light
    • Berg UV-Torch Pouch
    • Wilson Yamamoto 120 HRL with certificate
    • Wilson Yamamoto 84 HR45W with certificate
    • Chemetall Ardrox 9702 Water washable fluorescent penetrant
    • Berg HRA Scale 76-80 Calibrated
    • GE MIC-222A Test Stand
    • I-Gauging Economical Stainless Steel Digital Caliper, 6 Inch, Extra-Large LCD Display
    • GE XLG3 6.1 mm x 8.0m QuickChange Probe
    • Wilson Yamamoto 96 HR30X with certificate
    • Technisonic 5MHz x 0.187" (3/16) Diameter Right Angle Transducer
    • PH Tool Wood Case for Navy EC Standard
    • Berg HRC Scale 61-65
    • Extech Replacement Pins - Package of 50
    • GE 15.24 cm (6 in.) Tube for 3.9 mm Probe
    • GE 8 mm Non-Articulating Flexible Guide Tube 2.0 m length
    • Wilson Yamamoto 66.5 HR15N with certificate
    • DeFelsko PosiTest HHD Ground Cable, 7.5 m
    • GE Supervisor PC5 software
    • PH Tool Calibration Block No. 1 (K1)
    • Wilson Yamamoto 99 HRF with certificate
    • Berg HRC Scale 26-30
    • Spectroline ML-3500FL Flood
    • Wilson C Ring Grip Brale NIST
    carousel Button