MagnaFlux Standard Lead Contact Plate (MF-605647)

    MagnaFlux Standard Lead Contact Plate
    Starting at:

    $120.00 1. Quote Required

     

    This product has been discontinued.


    • Product Codes:
      MF-605647
    • Tech Support Available
    • Product Weight: 10.00

    HAVE A QUESTION?
       Hours:   8:00 am to 4:30 pm CST

    Description

    Standard Lead Contact Plate is the replacement for original equipment. The soft lead plate provides excellent contact with the test part. 

    Size: 6.75" x 6.625" x 0.25" thick / 17 cm x 17 cm x 0.6 cm thick

    Fits all units except A-915 and H Series units

    RECENTLY VIEWED PRODUCTS

    carousel button
    • Wilson Yamamoto 83 HRK with certificate
    • GE 45.72 cm (18 in.) Tube for 3.9 mm Probe
    • Wilson Round Ball Checking Anvil
    • Wilson Mandrel, 2" (50.8mm) For Gooseneck Anvil
    • Mitutoyo QM-Height Series 518-High Precision ABSOLUTE Digital Height Gage 0-18.3 in/0-465mm
    • Berg HRD Scale 76-80
    • Mitutoyo Deep groove 20 stylus 10μm
    • Chemetall Ardrox 9704 Water Washable Fluorescent Penetrant
    • MagnaFlux Connector Male Quick Connect 4/0 Cable Termination
    • Wilson Yamamoto 92 HRF with certificate
    • FlawTech VA-686-3 Advanced Specimen
    • Wilson Yamamoto 38 HR30N with certificate
    • Berg HRC Scale 31-35
    • Mitutoyo Knife edge surface stylus 2μm/60°
    • Wilson Yamamoto 80 HR30T with certificate
    • Wilson Yamamoto 74 HR15T with certificate
    • Sensor Networks SNI560, 5MHz Probe .63" Dia, 100'MD-BNC Cable
    • Berg HRB Scale 41-45 Steel Ball calibrated
    • Wilson Yamamoto 125 HRL with certificate
    • Mitutoyo KA-212 Two Axis Counter
    • MagnaFlux Dual Verticle Prod Set, Lug Connection for M-2000 Series
    • Tramex Ambient RH Long Narrow Bayonet Probe
    • Berg HRB Scale 76-80 Steel Ball calibrated
    • Mitutoyo Digimatic Cable with Data Button IP Type
    • Fischer Technology CAL-S SMP CU 58 MS/m, 100% IACS
    • Wilson N Brale, Gear Roots & Groves - .115" tip diameter, Wedge Point N Scale (thinest possibl
    • Magnaflux Filter EV6000
    • PH Tool Calibration Block No. 2, 1018 Steel
    • Danatronics Telescopic Wand 8'-15'
    • Wilson Yamamoto 68 HRA with certificate
    • Wilson Yamamoto 57 HRK with certificate
    • MagnaFlux Vibrance EV5000 UV-LED Black Light
    • Berg UV-Torch Pouch
    • Wilson Yamamoto 120 HRL with certificate
    • Wilson Yamamoto 84 HR45W with certificate
    • Chemetall Ardrox 9702 Water washable fluorescent penetrant
    • Berg HRA Scale 76-80 Calibrated
    • GE MIC-222A Test Stand
    • I-Gauging Economical Stainless Steel Digital Caliper, 6 Inch, Extra-Large LCD Display
    • GE XLG3 6.1 mm x 8.0m QuickChange Probe
    • Wilson Yamamoto 96 HR30X with certificate
    • Technisonic 5MHz x 0.187" (3/16) Diameter Right Angle Transducer
    • PH Tool Wood Case for Navy EC Standard
    • Berg HRC Scale 61-65
    • Extech Replacement Pins - Package of 50
    • GE 15.24 cm (6 in.) Tube for 3.9 mm Probe
    • GE 8 mm Non-Articulating Flexible Guide Tube 2.0 m length
    • Wilson Yamamoto 66.5 HR15N with certificate
    • DeFelsko PosiTest HHD Ground Cable, 7.5 m
    • GE Supervisor PC5 software
    • PH Tool Calibration Block No. 1 (K1)
    • Wilson Yamamoto 99 HRF with certificate
    • Berg HRC Scale 26-30
    • Spectroline ML-3500FL Flood
    • Wilson C Ring Grip Brale NIST
    carousel Button