Tramex Determinator Concrete Moisture Probe and Kits (CMP)

    Tramex Determinator Concrete Moisture Probe and Kits
    Starting at:

    $935.00 1. Quote Required

     

    This product has been discontinued.

    ADD TO CART

    Share this product
    • NEW Product
    • Product Codes:
      CDK
    • FREE Ground Shipping
    • Tech Support Available
    • Product Weight: 3.00
    HAVE A QUESTION?
      Call:   1-847-577-3980
      Send an Email
       Hours:   8:00 am to 4:30 pm CST

    Description

     

    The Tramex Determinator Concrete Moisture Probe extends the capabilities of the Tramex Concrete Moisture Encounter range and provides in-situ moisture content readings. Measurements are made in both the top ¾ inch ( 19 mm) layer and within the body of concrete floors and slabs down to an extendable depth of up to 4" (100mm). The Determinator can be used in conjunction with the CME5, CMEX5, and older Concrete Moisture Encounters CME4 and CMEX2. 

    How it Works

    The Determinator operates by measuring the electrical impedance of a material as it varies depending on its moisture content. The test material's electrical impedance is measured by creating a low frequency alternating electric field between the electrodes and the probe to a depth of up to 4”. A small amount of alternating current flows through thefield and is is inversely proportional to the impedance of the material. The instrument detects this current, determines its amplitude and thus derives the concrete's moisture content.

    Determinator Tech Kit

    The Determinator Tech Kit offers instant and precise testing of both surface and in-body concrete moisture content in slabs using a unified gravimetric-based testing method. Using the CMEX5 digital concrete moisture meter, you can non-destructively test concrete and perform comparative testing per ASTM F2659. The reusable Determinator Probe used with the CMEX5 allows for in-depth moisture content probe testing within the concrete, down to an extendable depth of up to 4" (100mm). The Tramex Meter App allows you to geographically tag test results, create, save and share reports and charts.

    Determinator Inspector Kit

    Like the Tech Kit, the Determinator Inspector Kit uses a unified gravimetric-based testing method per ASTM F2659. In addition, the CMEX5 has Hygro-i2® RH probes for in-situ testing of concrete and an infrared surface thermometer for surface temperature and dew point conditions. The Tramex Meters App allows you to geographically tag test results, create, save and share reports and charts, as well as see your meter screen on your phone when using the CMEX5 extension handle.

    Features

    • Instant and Accurate
    • Designed to work in the same drill-hole made for the F2170 test.
    • Eliminate confusion between in-situ Relative Humidity tests and surface Moisture Content tests.
    • Determine if moisture is coming from below or above the concrete slab surface.
    • Determine the type and extent of mitigation if needed.
    • Reusable, Extendable, and requires no plastic hole liners.
    • Can be used in conjunction with Tramex Concrete Moisture Encounters CME5, CMEX5, (CME4 and CMEX2)

    Videos

    Specs

    Basic Kit Specs

    Size:

     17.1” x 14.2” x 5.5” (43.5cm x 36cm x 14cm)

    Weight:  

    5.7 lbs (2.6kg) 

    Construction:

    ABS Body

      

    Concrete Moisture Probe Determinator - Measuring Range: 

    • Moisture Content for Concrete with Tramex CMEX5 and CMEX2: 0 - 6.9%
    • Moisture Content for Concrete with Tramex CME5 and CME4: 0 - 6%

    Depth of Penetration:

    • 1 1/4” probe depth for concrete between 2” to 4”
    • 2 1/4” probe depth for concrete between 4” to 6”
    • 3 1/4” probe depth for concrete between 6” to 9”
    • 4 1/4” probe depth for concrete between 9” to 11”

    Tech Kit & Inspector Kit Specs

    Concrete Moisture Encounter X5  - CMEX5 - Measuring Range:

    Depth of penetration in concrete:

    approx.  ¾" (20mm)

    Moisture content for Concrete:

    0 → 6.9 %

    Comparative for Gypsum floor screed:

    0 → 12

    CM Equiv Anhydrite/Concrete:

    0→2.7 / 0→4.3

    Reference scale:

    0 → 100

    Relative Humidity:

    (with optional Hygro-i2 ® probe):

    0 → 99%

    Humidity accuracy: 0% → 99%RH +/- 2% @ 25°C / 77°F
    Moisture content for wood (with optional wood pin probes):

    5 → 30 %

    Additional Technical Kit Specs:

    Size:

    17.1” x 14.2” x 5.5” (43.5cm x 36cm x 14cm)

    Weight:

    6.5 lbs (2.95kg)

    Power:

    2 x AA batteries

     

    Inspector Kit Specs

    Infrared Thermometer IRT2

    Temperature range:

    -58ºF ~ 1202ºF (-50 to 650 ºC)

    Distance to Spot ratio:

    D:S = 12:1

    Display resolution:

    0.1 ºF(0.1ºC)   <1000 1ºC   >1000

    Accuracy for targets:

    Assumes ambient operating temperature of  73 to 77ºF (23 to 25 ºC) -58ºF ~ 68ºF (-50 ~ 20ºC) 

    ±4.5ºF (2.5ºC) 68ºF ~572ºF (20ºC ~300ºC)  ±1.0% ± 1.8ºF (1.0ºC) 572ºF ~ 1202ºF (300ºC ~650ºC) ±1.5%

    Repeatability:

    -58~68ºF (-50~20ºC)  :  ± 2.3ºF (1.3ºC) 68~1202ºF (20~650ºC) : ±0.5% or ±0.9ºF (0.5ºC)

    Response time:

    150ms

    Spectral response:

    8~14um

    Emissivity:

    Digitally adjustable from 0.10 to 1.0

    Over range indication:

    LCD will show “----”

    Polarity:

    Automatic (no indication for positive polarity); Minus (-) sign for negative polarity

    Diode laser output:

    <1mW,Wavelength 630~670nm, Class 2 laser product

    Operating temp.:

    32 to 122ºF ( 0 to 50ºC)

    Storage temp.:

    14 to 140ºF (–10 to 60ºC)

    Relative humidity:

    10%~90%RH operating, <80%RH storage

    Power supply:

    9V battery, NEDA 1604A or IEC 6LR61, or equivalent

    Safety:

    “ CE ” Comply with EMC


    Additional Inspector Kit Specs

    Size:

    17.1” x 14.2” x 5.5” (43.5cm x 36cm x 14cm)

    Weight:

    7.9 lbs (3.6 kg)

    Power:

    2 x AA batteries, 1 x 9 volt PP3 battery

     

    Package Includes

    RELATED ACCESSORIES