Proceq Equotip 550 UCI Model Hardness Tester w/ Test Block

Native Scale

HV (UCI)

Measuring Range

20 - 2000 HV

Measuring Accuracy

± 2% (150 - 950 HV)

Available Scales

HB, HV, HRA, HRB, HRC, HR15N, HR15T, MPA

Available Probes

UCI (Adjustable HV1 - HV5)

Combination With Other Methods

Leeb, Portable Rockwell

Average Roughness Ra (µm / µinch)

12.5 / 500

Minimum Mass (kg / lbs)

0.3 / 0.66

Minimum Thickness (mm / inch)

5 / 0.2

Standards

DIN 50159
ASTM A 1038

Guidelines

ASME CRTD-91
DGZfP Guideline MC 1
VDI / VDE Guideline 2616 Paper 1
Nordtest Technical Reports 424-1, 424-2, 424-3

 Display

 7” color display 800x480 pixels

 Memory

 Internal 8 GB flash memory

 Regional Settings

 Metric and Imperial units, multi-language and timezone supported

 Power Input

 12 V +/-25 % / 1.5 A

 Connectors

 Probe, USB host / device and Ethernet

 Dimensions

 250 x 162 x 62 mm

 Weight

 1525 g (incl. Battery)

 Battery

 3.6 V, 14.0 Ah

 Battery Lifetime

 > 8 h (in standard operating mode)

 Humidity

 < 95 % RH, non condensing

 Operating Temperature

 -10 °C to +50 °C

 IP

 54

 Certification

 CE

Instrument Firmware

Profile view
One-step calibration
Automatic compensation for impact direction
Personalized user profiles and views
Integration in automated testing environments (incl. remote control)
11 Languages and timezone supported

PC Software

Equotip Link allowing direct reporting and custom reports

Display

7” color rugged touchscreen unit (800 x 480 pixels) with dual core processor

Memory

Internal 8 GB flash memory (> 1’000’000 measurements)

Connections

USB host / device and Ethernet

Adjustable test load

The required test load can be selected by the user in the settings menu. For each measurement series, the force can be chosen from five levels between HV1 and HV5 (~10 N and ~50 N), to fit a wide range of applications. The minimum required mass for reliable UCI measurements is 0.3 kg (0.66 lbs), and a thickness of at least 5 mm (0.2 inch).

Examples:

HV1 - Precision parts, thin coatings, hardened layers
HV5 - Large components, HAZ, forging parts

Optional Special Foot

The optionally available special foot increases the measurement repeatability. It can be used for flat or curved surfaces. For curved surfaces there are two different apertures, one for diameters from 5 to 25 mm and one for larger diameters from 20 to 70 mm.

Standard to large objects

Yes

Round objects

Yes

Light objects

Yes

Very hard objects

Yes

Cast objects

No

Polished objects

Yes

Limited accessibility

No

Thin objects

No

Heat treated surfaces

Yes

Additional Applcations:

Steam turbine generator
Thermal cutting