GE TM1-D Plus - Stresstel

PDF Brochure || Cal Blocks || Transducers || Couplants || Ultrasonic Accessories

Product Description

The StressTel TM1-D Plus measures thickness of thin precision machined metal components using a single element delay tip transducer . The TM1-D Plus has a measurement range of 0.0100 inches to 1 inch (0,254 mm to 25 mm) in steel. The TM1-D Plus contains inspector preferred features including alarm limits, differential display, and a rugged metal case.

The TM1-D Plus operates only in echo to echo mode and will measure THRU Paint.

The TM1-D Plus is supplied with a single element delay tip transducer.

Kit Contents

1 ea· TM1-D Plus Ultrasonic Thickness Gauge
1 ea· Transducer (Please choose from drop down)
1 ea· Lemo-MD Transducer Cable Assembly
1 ea· Operation Manual
1 ea· Couplant
4 ea· "AA" Batteries (Alkaline or NiCad)
1 ea· Screwdriver
1 ea· Plastic Instrument Accessory Case
1 ea· ISO 17025 Certificate of Calibration

Specifications

Key Features
· Simple intuitive operation
· Adjustable material calibration for metals
· ALARM mode for comparison to nominal thickness
· DIFFerence mode for comparison to nominal thickness
· Rugged metal case and industrial keypad
· 40 hours life with (4) "AA" alkaline batteries
Physical Description
· 3.5 inches wide (89mm)
· 6.3 inches long (160mm)
· 1.5 inches deep (38mm)
· 18 ounces (509 grams)
Display
· 4 digit amber backlit LCD
· ½ high digits
· Coupling indicator
· English/Metric selectable
· IN or MM displayed
· Display flashes to indicate
battery replacement
Measuring Range
· Delay Mode: 0.0100 in. to 1.000 in. ( 0.25 to 25mm) in mild steel
Power Supply
· 4 "AA" Alkaline or NiCad batteries
· Interchangeable and easy to access
· 40 hours operating time
Materials
· Fast and easy calibration for wide variety of metals and plastics including steels, stainless steels, aluminum, and plexiglass
Warranty Term:
· 2 Years

Unit Features

1. Lemo quick-disconnect connectors 2. PRB carat lights when unit in probe selection mode 3. DIF carat lights when unit in differential measurement mode 4. LT carat lights when display backlight control mode is enabled 5. HI/LO carat lights when unit in Hi/Lo tolerance limits and alarm set-up modes 6. Backlit display 7. Activates arrow keys to set values in THK, VEL, DIF, HI/LO, PRB, and LT modes 8. Arrow keys 9. Selects operating mode: THK, VEL, DIF, HI/LO, PRB, and LT 10. Serial RS 232 port 11. Material calibration key 12. Power key 13. Clears display 14. Sends measurement information to compatible printer/computer 15. Low battery indicator 16. Indicates displayed reading outside tolerance limit 17. Over range indicator 18. THK carat lights when unit in normal thickness measurement mode 19. VEL carat lights when unit in material calibration mode