GE T-Mike P - Stresstel (062-900-010)

Product Description || PDF Brochure || Specs || Kit Contents || Unit Features
Cal Blocks || Transducers || Couplants || Ultrasonic Accessories

Dual Element Transducer w/ Cable - User Selectable for Inclusion with Kit
Application	ID	Measuring Range	Size Frequency	Case	Cable
General Purpose	063-200-003	0.040" - 5.000" or 1.00mm - 125 mm	1/4" 5MHZ	Knurled	Potted - 4ft.
General Purpose	063-200-046	0.040" - 5.000" or 1.00mm - 125 mm	1/4" 5MHZ	Flex Grip	Potted - 4ft.
Extended Wear	063-200-004	0.040" - 5.000" or 1.00mm - 125 mm	1/4" 5MHZ	Knurled	Potted - 4ft.
High Resolution	063-200-016	0.040" - 5.000" or 1.00mm - 125 mm	1/4" 5MHZ	Knurled	Potted - 4ft.
Thin Steel	063-200-013	0.040" - 3.000" or 1.00mm - 76 mm	3/16" 5MHZ	Knurled	Potted - 4ft.
Thick Steel	063-200-008	0.075" - 10.000" or 2.00mm -254 mm	1/2" 5MHZ	Knurled	Potted - 4ft.
Plate Aluminum	063-200-002	0.040" - 4.000" or 1.00mm - 102 mm	1/4" 10MHZ	Knurled	Potted - 4ft.
Cast Iron	063-200-006	0.075" - 4.000" or 2.00mm - 102 mm	1/2" 2.25MHZ	Knurled	Potted - 4ft.
Dual Element Transducer - Additional $100 Charge to Substitute in Kit
General Purpose	063-200-018	0.025" - 2.000" or 0.60mm - 50mm	1/4" 7.5 MHz	Knurled	Potted - 4ft.
High Temp.	063-200-022	0.040" - 4.000" or 1mm - 102mm	1/4" 5 MHz	Insulated	Potted - 4ft.
General Purpose	063-200-075	0.060" - 8.000" or 1.50mm - 200mm	3/8" 5 MHz	Bell Housing	MD Connector

 

 

 

 

 

 

 

Product Description

P means Programmable. With single button operation the T-Mike P is simplest corrosion thickness gauge in the StressTel line. This compact, rugged instrument is factory set to measure thickness readings on carbon steel but can be easiliy re-programmed for use on other materials.

Besides programming of sound velocity you may also change from imperial to metric units or display the backlight. Programming is simply accomplished by connecting the instrument to a T-Mike E or to your computer.

Kit Contents

· T-Mike Programmable Ultrasonic Thickness Gauge
· ¼" x 5 MHz Transducer
· Operation Manual
· Instruction Card
· Set Mike/Get Mike Software
· Data Transfer Cable (for custom setting velocity)
· 25/9 pin Connector/Adapter (for use with cable)
· Couplant
· 4 "AA" Batteries (Alkaline or NiCad)
· Instrument Accessory Case
· Certificate of Calibration

Unit Features

1. Power Key
2. Increase value within CAL or SETUP
3. Decrease value within CAL or SETUP
4. SETUP key to change operating modes
5. Initiates CAL function and changes SETUP Modes
6. Set backlight to AUTO or OFF
7. Initiates Min Capture Scan Mode
8. Toggles between THRU PAINT and normal IP Mode*
9. Coupling Indicator 10. 2-Point CAL Mode indicator
11. Velocity CAL Mode indicator
12. THRU PAINT Mode indicator*
13. Probe Recognition indicator
14. CAL Mode indicator
15. Metric or Imperial Units
16. Alarm Indicator
17. Battery Indicator
18. SCAN Mode Indicator

Specifications

Key Features
· Single key operation
· Pre-calibrated for steel or a material of your choice
· Rugged metal case and industrial keypad
· 300 hours life with (4) "AA" alkaline batteries
Physical Description
· 2.5 inches wide (64mm)
· 4.5 inches long (114mm)
· 1.25 inches deep (33mm)
· 11 ounces (312 grams)
· Environmentally sealed aluminum case
· Water resistant keypad
Power Supply
· 4 "AA" Alkaline or NiCad batteries
· Interchangeable and easy to access
· 300 hours operating time
· 80 hours with backlight
Materials
· Factory set for measurements on steel, programmable for other materials
Measuring Range
· 0.025"- 19.999" / 0,6 mm - 500 mm
depending on transducer, surface condition, temperature and material
Display
· 4 ½ digit amber backlit LCD
· ½ high digits
· Coupling indicator
· English/Metric selectable
· IN or MM displayed
· Display flashes to indicate battery replacement
Warranty Term:
· 5 Years