Dakota CMXDL-PLUS Dual Element Corrosion Thickness Gauge (CMXDL-PLUS)

    Dakota CMXDL-PLUS Dual Element Corrosion Thickness Gauge
    Starting at:

    $3,225.00 1. Quote Required

     

    This product has been discontinued.

    ADD TO CART

    Share this product
    • NEW Product
    • Product Code.:
      CMXDL-PLUS
    • Tech Support Available
    • Product Weight: 0.00
    HAVE A QUESTION?
      Call:   1-847-577-3980
      Send an Email
       Hours:   8:00 am to 4:30 pm CST

    Description



    The Dakota Ultrasonics CMXDLP+ is the premium model in the CMX Series of Gauges. It efficiently measures both coating and wall thickness from a single side. In Pulse-Echo mode, it automatically eliminates coating thickness, aiding in pinpointing corrosion and pitting without removing the coating.

    The A-Scan Display Mode shows waveform echoes graphically, facilitating optimal gauge settings adjustment. The new E-EV Operating Mode ("Echo-Echo-Verify") ensures measurement accuracy by verifying with subsequent echoes.

    The oversized backlit LCD displays critical settings, including Velocity, Operating Mode, Alarms, and Scan Mode. The backlight can be set to ON, OFF, or AUTO.

    Five user-selected operating modes are available:

    Coating On: Measures wall and coating thickness separately using Pulse-Echo.

    Coating Off: Measures wall thickness only using Pulse-Echo.

    Temperature Compensated: Adjusts calibration for material temperature changes while measuring wall thickness using Pulse-Echo.

    Thru-Coat: Measures wall thickness only using Echo-Echo, excluding coating.

    Coating Only Mode (CT): Measures coating thickness in the range of 0.0005 to 0.100 inches (0.013 to 2.540 mm). Range may vary slightly based on the coating.




    Features

    • Built-in memory with RS-232 output for transferring data to a Printer or PC
    • Includes Datacomm Data Transfer & Analysis Software and RS-232 Cable, FREE
    • Data Files can be user-set for a "grid type" structure where data is formatted in Rows & Columns or a "sequential" file where all data appears in a single column
    • Each "grid type" File can be set for up to 999 rows by 52 columns
    • Each "sequential" File can be set for up to 512 rows by 1 column
    • Each File can be set for "data only" or as "data plus B-scan Graphic". Memory Capacity is over 225,000 data values or over
    • 16,000 data values with B-scan
    • Wide variety of dual-element probes can be used for nearly any application
    • Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db)
    • 64 custom setups can be stored and retrieved for convenient use and labeled for easy identification

     

    Specs

    Range in Steel: Pulse-Echo Mode: Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters)

    Echo-Echo Mode: Thru Paint & coatings measures from 0.100 - 4.000 inches (2.54 to 102 mm). Range will vary depending on the thick
    Range in Coating Only Mode 0.0005" - 0.1000" / Resolution: 0.0001"
    (0.013 - 2.540 mm / Resolution: 0.001 mm)
    Max Coating 0.100"
    Resolution: .001 inches (0.01mm)
    Velocity Range: .0492 to .3936 in./ms
    1250 to 9999 meters/sec
    Units: Inch or mm
    Measurement Modes: - Pulse-Echo (corrosion mode)
    - Pulse-Echo Coating (Corrosion w/o coating)
    - Echo-Echo (thru-paint)
    - Temp Comp (auto adjust for material temp)
    - Coating Only (Ultrasonic Coating Gauge)
    Transducer Types: Dual Element (1 to 10 MHz).
    Output RS-232 for upload/download of setups
    Memory capacity: TI-CMXDLP: over 200,000 measurements
    Power Source: Three 1.5V alkaline or 1.2V NiCad AA cells
    Battery Life: Typically operates for 150 hours on alkaline and 100 hours on NiCad
    Auto Power off: After 5 minutes of non-use
    Display: 1/8 in. VGA grayscale display 62 x 45.7mm
    Keyboard: Membrane switch with twelve tactile keys
    Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
    Temp. Limits Ambient: -20 to 120° F (-30 to 50° C)
    Material: -0 to 200° F (-20 to 100° C
    Special high temperature probes are optionally available.
    Weight, net: 383 grams
    Dimensions: 63.5 W x 165 H x 31.5 D mm
    Warranty: 2 year limited
    Certification: CE Approved, Factory calibration traceable to national standards

    Additional Info

    Brochure

    Package Includes

    • CMXDL-PLUS Corrosion Thickness Gauge and Probe
    • Bottle of Coupling Fluid
    • 2 AA Batteries
    • NIST-Traceable Calibration Certificate
    • Operating Manual
    •  RS-232 cable
    • Carrying Case