Parker DA-750 115V Portable Magnetic Inspection Unit (DA750-115)

    Parker DA-750 115V Portable Magnetic Inspection Unit
    Starting at:

    $4,715.00 1. Quote Required

     

    This product has been discontinued.


    • Product Code.:
      DA750-115
    • Tech Support Available
    • Product Weight: 43.00

    HAVE A QUESTION?
       Hours:   8:00 am to 4:30 pm CST

    Description

    DA-750 Heavy Duty High Amp Portable Magnetic Inspection Unit

    The Parker Research DA-750  heavy duty portable  magnetic inspection unit provides high output AC or HWDC fields for magnetic particle inspection.  Field selection is determined by using the appropriate field cable connector.  Current output is infinitely variable from zero to maximum by use of the current control located on the front panel, and is indicated by the panel meter. Actual current output is determined by cable size and length. AC magnetic fields offer the best sensitivity for detection of surface defect indications.

    750 AMP OUTPUT 

    Operates from either 115 VAC or 230 VAC (must be specified.) The AC field is also beneficial for demagnetizing after inspection.

    Half-Wave DC magnetic fields provide for the detection of certain subsurface defect indications. DC fields penetrate a cross section of the test area rather than just the surface. Optional magnetizing cables can be equipped with prods for circular magnetization. The cables can be wrapped around parts to form a coil for longitudinal magnetization. Demagnetization is accomplished in a similar manner.

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Specs

      Model DA-750 Model DA-1500
    Length 17 1/2" (44.5 cm) 21 5/32 " (54.9 cm)
    Width  9 1/16" (23 cm)  9 11/32" (23.7 cm)
    Height 7 13/16" (19.8 cm) 9 17/32" (24.2 cm)

    Maximum output current ratings based on the
    use of two 15-foot lengths of 4/0 cable

     750 amps, AC or HWDC  1500 amps, AC or HWDC
     Line Voltage single phase  115 VAC, 50/60 Hz;
    230 VAC, 50/60 Hz
     230 VAC, 50/60 Hz;
    460 VAC, 50/60 Hz
     Line current  26 amps @ 115 VAC;
    13 amps @ 230 VAC
     45 amps @ 230 VAC;
    23 amps @ 460 VAC
     Maximum duty cycle  2 minutes ON
    2 minutes OFF
     2 minutes ON
    2 minutes OFF
     Unit weight  35 lbs. (15.9 kg)  93 lbs. (42.2 kg)

     

    Additional Info

    RELATED ACCESSORIES