PDF Brochure

Rental Package includes:

MIC10 Portable Hardness Tester
Probe (Please specify)
Probe Cable
Operating Manual
Carry Case
ISO 17025 Certificate of Calibration
Other items available upon request, must specify, may increase package cost

Please contact Berg Engineering at 1-847-577-3980 for package rental cost and availability.

Easy operation, high performance and unique data processing.

What this small instrument can do.

By pressing a key, you can display your reading as a single value or as the active arithmetical average value of a hardness measurement set. Editing of erroneous single values, without having to interrupt the measurement set, is just as simple. Adjustable alarm thresholds show you critical measurement values both visually and with audiable alarms. The calibration parameters for measurements on low and non-alloyed steel are preprogrammed into the MIC10; however, the instrument can be easily and quickly recalibrated to other materials. Instrument operation can be customized for specific testing requirements: unnecessary functions can be inhibited, e.g. various hardness scales or the recalibration capability. This reduces key presses and simplifies operation.

Specifications

Method of measurement:

Vickers penetration with indentation evaluation by the UCI method under load (diamond angle 136°)

UCI probes:

To be selected according to application:

Handheld probes: 10 N (1 kgf) standard MIC 201-A short MIC 201-AS extended MIC 201-AL 50 N (5 kgf) standard MIC 205-A short MIC 205-AS extended MIC 205-AL 98 N (10 kgf) standard MIC 2010-A

Motor probes: 8.6 N (0.9 kgf) MIC 211 3 N (0.3 kgf) MIC 2103-A 1 N (0.1 kgf) MIC 2101-A

Range: 20 - 1740 HV

Conversion: HV, HB, HRC, HRB N/mm² (only with the 10 kgf handheld probe) according to DIN 50150, ASTM E 140

Display: 4 digit LCD with switchable backlight

Weight: approx. 300g

Dimensions: 160 x 70 x 45 mm, 6.3 x 2.8 x 1.8 inches (W x H x D)

Permissible ambient temperature: In operation: -15°C to 55°C(5°F to 131°F) In storage: -20°C to 60°C (-4°F to 140°F)

Power: 2 x 1.5V AA batteries

Operational duration: approx. 15 hours without backlight

Login or Register

Request a Quote

Berg Rental - MIC10 Portable Hardness Tester

Welcome!