Bruker G4 ICARUS CS TF - Simultaneous or Individual Carbon and Sulfur Analyzer in Solids
|
Code: g4-cs tf
|
 |
The combustion analyzer G4 ICARUS CS TF is designed for the automatic determination of carbon and sulphur in a wide range of solid substances. The sample, weighed into in a standard ceramic boat is combusted -depending on the material together with an accelerator- in a high temperature tube furnace in an oxygen stream.
The temperature of the furnace is continuously adjustable up to approx. 1.500°C. The resulting reaction gases CO2 and SO2 are measured by solid-state IR detectors of maximum selectivity and sensitivity. The system is characterized by an easy operation and automatic evaluation by means of an external PC.
The Application
The G4 ICARUS CS TF is suitable for both, simultaneous or individual elemental analysis of carbon and sulphur in a nearly unlimited range of materials, e.g. ores, steel, iron, alloys, ceramics, cement, limestone, and many more.
The Software
The analysis software of the G4 ICARUS CS is clear and simply structured. All tasks to be performed by the software are clearly divided into four different screens.
• Analysis screen
Performance of the analysis, manual input of sample weight or by direct transfer from the balance, display of weight buffer, graphical display of signal data, display of the results of the last five analysis
• Program settings
Setting of analysis parameters, e.g. timing, storage of configuration for different applications and methods with complete set of data
• Statistics screen
Statistical evaluation of the analyses, calculation of mean value, standard deviation, variance, variance coefficient, display of minimum and maximum value, print-out
• Calibration
Different methods for the calibration of the instruments are selectable: single-point, two-point or multipoint calibration
The Benefits
- Short analysis time, nearly maintenance-free operation
- External combustion unit, Crusilite tube furnace with digital temperature control, temperature adjustable up to 1550°C (permanent temp. 1450°C), for ceramic combustion tube Æ 42/34x650 mm and standard combustion boats
- Analyzer with long term stable, selective NDIR detection system with high resolution, two measuring ranges for CO2 and one for SO2
- Automatic base line compensation/zero adjustment, Automatic Level Control (ALC)
- Automatic optimum range selection
- Easy to operate via external PC with Windows-Software, automatic evaluation, storage of sample information, data storage for follow-up assessment of all analyses
- Data transfer via FTP or local network connection possible
- Also available as single-element analyzer for Carbon or Sulphur
