Magnaflux P-70 Portable Power Pack 230v (MF-190575-01)

    MagnaFlux P-70 Portable Power Pack 230v
     

    Quote Required Quote Required

     

    This product has been discontinued.


    • Product Code.:
      MF-190575-01
    • Tech Support Available
    • Product Weight: 35.00

    HAVE A QUESTION?
       Hours:   8:00 am to 4:30 pm CST

    Overview

    BERG ENGINEERING & SALES COMPANY, INC.

    The Magnaflux P-70 Portable Power Pack is a member of Magnaflux’s P-Series of portable power packs. These portable power packs are designed for use with very large or heavy parts or on the job inspections.

    The P-Series power packs are able to detect surface defects using AC current or half wave DC (HWDC) current using prods, central conductors or coils to find defects in any direction. They can demagnetize parts in AC mode by turning the current dial to zero. They also have a built-in automatic reset circuit breaker and have infinitely variable current control. The system can be used as a power source for Magnaflux MAG KIT modular bench systems.

    The P-70 Power Pack comes with a maximum output of 750 amps (AC or HWDC), line current of 26 amps at 115 VAC or 13 amps at 230 VAC and a current input single phase of 115 VAC, 50/60 Hz or 230 VAC, 50/60 Hz with other voltages available. The unit weighs in at 35 lbs and has a length of 17 ½”, a width of 9” and a height of 7 ½”.

    Description


    Magnaflux P-Series Portable Power Pack offers a convenient solution to in-field testing.

    Performing mag particle inspection of in-field parts or large, heavy parts that require only moderate power for magnetization can be conveniently tackled with the Magnaflux P-Series Portable Power Pack.

    Portable Power Packs are convenient and economical inspection units that are used in a wide range of magnetic particle applications that require only moderate power.

    The Magnaflux Portable Power Packs are ideal for large or heavy parts, in-service mobile equipment, or job-site welds.

    Features:

    • Find surface defects with AC current; switch cable connection to halfwave DC (HWDC) for near-surface flaws
    • Locate defects in any direction using prods, central conductor, coil (wrap part with 3-5 turns of cable)
    • Infinitely variable current control
    • Demagnetize your parts in AC mode by slowly turning the current dial to zero
    • Built-in automatic-reset circuit breaker
    • May be used as the main power source for the Magnaflux MAG Kit modular bench inspection systems

     
    P-70 Power Pack
    P/N 190575 – 115v OR P/N 190575-1 - 230v
    P-1500 Power Pack
    P/N 198500 (Must specify 230v/460v)
    Length 17 1/2" (44.5 cm) 22" (55.8 cm)
    Width 9" (23 cm) 9 1/2" (24.3 cm)
    Height 7 1/2" (19.1cm) 9 1/2" (24.3 cm)
    Maximum Output* 750 amps, AC or HWDC 1500 amps, AC or HWDC
    Current Input Single Phase 115 VAC, 50/60 hz; 230 VAC, 50/60 hz; (other voltages available) 230/460 VAC, 50/60 hz 460 VAC, 50/60 hz (other voltages available)
    Line Current 26 amps @ 115 VAC; 13 amps @ 230 VAC 42 amps @ 230 VAC; 21 amps @ 460 VAC
    Maximum Duty Cycle 2 minutes ON, 2 minutes OFF 2 minutes ON, 2 minutes OFF
    Unit Weight 35 lbs (15.9 kg) 93 lbs (42.2 kg)

    *Current ratings are based on the use of two 15-foot length of 4/O Cable

     

    Additional Info

    RELATED ACCESSORIES